The main preventive measures when using the milling machine

     At present, in the boiler, pressure vessel manufacturing industry, shipbuilding, electric power, petroleum, chemical machinery, engineering machinery manufacturing, bevel processing, bevel, straight edge, U-shaped slope of various low-carbon steel plates, stainless steel plates and aluminum plates before welding The important equipment for Kou Neng's one-time milling and forming is the milling machine. By using this equipment, the product can be processed smoothly and work efficiency can be improved. However, some unexpected defects will also be encountered during use, so we must find the corresponding Methods to solve these problems and promote normal work. So what should we do? To prevent these defects from occurring, please see our three preventive measures below.

    1. Effective control of steel plate quality:

    High-strength and high-power grooved vertical rollers are used to control the left and right movement of the plate, and the supporting roller is used to prevent the plate from jumping up and down, strengthen the leveling control, and make the steel plate flatness consistent.

    2. Blade selection and installation accuracy:

    In order to adapt to the characteristics of continuous operation of high-efficiency pipelines, edge milling machine blades are required to have high thermal shock resistance and plastic deformation resistance, high red hardness, good wear resistance, good impact resistance, and easy and quick replacement. Choose high-quality coated carbide blades.

    3. Reasonable cutting process parameters:

    Choose the milling process reasonably according to the actual production situation. Under the condition of ensuring production, try to use the single milling process to reduce the milling defects and easy processing. Choosing a suitable working width can not only reduce the probability of milling. At the same time, it can ensure the life of the blade to the greatest extent, thereby improving the machining accuracy. In theory, the milling amount of 8-10 mm is generally selected.

     The above are the three major preventive measures for us to avoid defects when using the milling machine. We hope that the majority of operators must pay attention to it before using it. The successful application of the milling machine reduces the consumption of the plate and greatly improves the bevel forming rate, thus laying a good quality foundation for the subsequent welding and forming work.